Abstract
The findings from a numerical investigation into the degree of composite action that may be mobilised within floor systems comprising cold-formed steel joists and wood-based particle boards are presented herein. Finite element models have been developed, simulating all the components of the examined systems, as well as the interaction between them. The models include initial geometric imperfections, the load-slip response of the fasteners employed to achieve the shear connection as well as both geometric and material nonlinearities. The developed models were first validated against 12 physical tests reported in the literature, which showed them to be capable of accurately capturing the load-deformation curves and failure modes exhibited by the tested specimens. Parametric studies were then performed to examine the influence of key parameters on the structural behaviour of these systems, including the depth and thickness of the cold-formed steel section, as well as the spacing of the employed fasteners; in total, about 100 systems have been examined. Significant benefits in terms of structural response have been identified from the presented numerical study as a result of the mobilisation of composite action; for the systems investigated, which were of typical, practical proportions, up to 140% increases in moment capacity and 40% increases in stiffness were found. The presented research reveals the substantial gains in structural performance and the influence of the key governing parameters for this novel form of composite construction.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.