Finite Element Modeling of the Different Failure Mechanisms of a Plasma Sprayed Thermal Barrier Coatings System

Abstract

A new finite element model is used to investigate catastrophic failures of a thermal barrier coatings system due to crack propagation along the interfaces between the ceramic top-coat, thermally grown oxide, and bond-coat layers, as well as between the lamellas structure of the ceramic layer. The thermo-mechanical model is designed to take into account a non-homogenous temperature distribution and the effects of the residual stresses generated during the coating process. Crack propagation is simulated using the contact tool “Debond” present in the ABAQUS finite element code. Simulations are performed with a geometry corresponding to similar or dissimilar amplitudes of asperity, and for different thicknesses of the oxide layer. The numerical results have shown that crack evolution depends crucially on the ratio of the loading rate caused by growth and swelling of the oxide layer and also on the interface roughness obtained during the spraying of coatings.