Abstract
Degeneration and loss of articular cartilage in the synovial joint have been recognized as the main source of osteoarthritis which leads to pain, swelling and limit the joint mobility. Extensive experimental and computational studies have been performed to study the mechanical behavior and characterize the biomechanical properties of articular cartilage. However, a lack of attention was made on the curvature of the cartilage surface by assuming it was a flat surface. This assumption was inappropriate since the synovial joints possessed curved geometrical shape and may contribute to inaccuracies in characterizing the articular cartilage biomechanical properties. This study aims to examine the effects of the curvature of the cartilage surface in finite element modeling which incorporated with the experiment method to characterize biomechanical properties of articular cartilage. In this study, the biomechanical behavior of contact pressure and pore pressure were investigated at different radius of cartilage surface using the finite element method. The cartilage biomechanical properties of elastic modulus and permeability of the bovine humeral head were then characterized using a combination of indentation test and finite element method. It was found that the cartilage curvature produced a 6% difference in contact pressure and a 39% difference in pore pressure distribution compared to the flat surface cartilage in finite element analysis. Furthermore, significant observation in the characterized biomechanical properties was obtained where the differences of the cartilage curvature reached 33% for elastic modulus and 56% for permeability. Based on the results, the surface curvature of articular cartilage could play an important role in the computational modeling and characterization of its biomechanical properties.
Highlights
Osteoarthritis (OA) is the most common joint disease which normally occurs at the knee, hip, hand and spine
This study aims to examine the effects of the curvature of the cartilage surface in finite element modeling which incorporated with the experiment method to characterize biomechanical properties of articular cartilage
The axisymmetric biphasic finite element (FE) models were used to observe the effects of surface curvature on the biomechanical behavior of cartilage tissue
Summary
Osteoarthritis (OA) is the most common joint disease which normally occurs at the knee, hip, hand and spine. In the early stage of OA, the patient will have difficulties in their movement in daily activities which could lead to chronic joint pain [1,2]. Articular cartilage is a thin layer tissue that covers the end surface of the articular bone in a synovial joint. It has no blood supply or nerve system and plays a significant role to absorb the load in synovial joints of the human body [6]. The cartilage tissue consists of two distinct phases which are the fluid and solid phases. The fluid phase consists of 60-85% water while the solid phase composed of 15-22% collagen and 4-7% aggrecan by wet weight [7,8].
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
