Finite element investigation into the use of carbon fibre reinforced PEEK laminated composites for distal radius fracture fixation implants

Abstract

Carbon fibre reinforced PEEK (CF/PEEK) laminates provide mechanical advantages over homogenous metal osteo-synthesis implants, e.g. radiolucency, fatigue strength and strength to weight ratio. Implants can be designed with custom anisotropic material properties, thus enabling the engineer to tailor the overall stiffness of the implant to the specific loading conditions it will experience in vivo.In the current study a multi-scale computational investigation of idealised distal radius fracture fixation plate (DRP) is conducted. Physiological loading conditions are applied to macro-scale finite element models of DRPs. The mechanical response is compared for several CF/PEEK laminate layups to examine the effect of ply layup design. The importance of ply orientation in laminated DRPs is highlighted. A high number of 0° plies near the outer surfaces results in a greater bending strength while the addition of 45° plies increases the torsional strength of the laminates. Intra-laminar transverse tensile failure is predicted as the primary mode of failure.A micro-mechanical analysis of the CF/PEEK microstructure uncovers the precise mechanism under-lying intra-laminar transverse tensile crack to be debonding of the PEEK matrix from carbon fibres. Plastic strains in the matrix material are not sufficiently high to result in ductile failure of the matrix. The findings of this study demonstrate the significant challenge in the design and optimisation of fibre reinforced laminated composites for orthopaedic applications, highlighting the importance of multi-scale modelling for identification of failure mechanisms.