Abstract
A finite element (FE) response model has been developed to describe stress and strain response parameters for geosynthetic-reinforced flexible pavement systems where the geosynthetic is placed at the bottom of the unbound aggregate layer. The model contains membrane elements and an anisotropic linear-elastic material model for the geosynthetic inclusion. Elasto-plastic models are used for the asphalt concrete, base aggregate and subgrade layers. Principal response parameters extracted from the FE model include vertical strain in the top of the subgrade and bulk stress in the unbound base aggregate layer. These response parameters are used in empirical damage models for the prediction of long-term pavement performance and the definition of reinforcement benefit. Reinforcement benefit is defined in terms of an extension of service life of the pavement, a reduction in aggregate thickness for equivalent service life, or a combination of the two. The damage models are calibrated from reinforced and unreinforced pavement test sections. The model is shown to provide general descriptions of reinforcement mechanisms that are consistent with those previously observed in instrumented pavement test sections. A companion paper (S.W., Perkins and M.Q., Edens (2003) A Design Model for Geosynthetic-Reinforced Pavements, International Journal of Pavement Engineering) describes the use of the response and damage models in a parametric study from which a design model for geosynthetic-reinforced pavements is developed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.