Abstract
One of the most useful tools for performing numerical analysis is finite element analysis. It is a cost-effective strategy. The hardness test on Al7475 and Al7020 metal matrix composites (MMC) are numerically simulated in this paper using finite element analysis. Metal matrix composites made of aluminum provide a wide range of useful features. It undoubtedly takes the first non-ferrous materials in terms of both production and consumption. Despite decades of extensive research and application, commercial aluminum composites are still poorly understood. The Al7475 and Al7020 metal matrix has been simulated when reinforced with graphite and silicon carbide. The weight percentage of graphite is increased from 3 to 12 with an interval of 3, and the other reinforcement, silicon carbide, is kept constant at 10%. ANSYS software is used to model and analyze the data. The simulated hardness values are compared with experimental hardness values. The error percentage is less than 5%. The comparison seems to be acceptable.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.