Abstract

We theoretically investigate a new type of piezoelectric actuator with tubular interdigitated electrodes. A partial model is adopted due to the axial symmetry of the actuator, which is divided into non-overlapping opposing electrode pairs on the center plane of the branch electrode. We present a finite element model of actuator and analyze its static-dynamic properties by using the commercially available finite element software ABAQUS. The length-to-diameter ratio of the tubular actuator can be as larger as necessary, so we are more concerned with the axial mechanical properties of the actuator. Thus we studied the influence of the electrode’s shape and structure size on the clamping stress and free strain of the partial models. We also analyzed an ordinary piezoelectric model of the same size. We demonstrated that the partial model displayed significantly improved axial performance over the ordinary one. The axial stress of the partial model can reach 2.75 times that of the ordinary one, and the axial free strain can reach 1.55 times that of the ordinary one. According to the results of the static analysis, appropriate electrodes and structural parameters were selected to establish a tubular actuator model, with which modal and harmonic response analysis were performed. A modal analysis was used to obtain the frequencies and the shapes of the axial vibration. Each pair of electrodes is shunted to a sinusoidal varying voltage. Using the results of the harmonic response analysis, we obtained the actuator’s axial resonance curve.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call