Finite element analysis of textile composite preform stamping

Abstract

The forming or draping of a textile composite preform may result in large changes in the fibrous microstructure of the preform. This change in the local fiber orientation leads to significant changes in the fabric permeability as well as the mechanical properties of the ensuing composite structure. Therefore, this change in orientation of the tows of the preform needs to be known accurately to calculate the various effective properties of the composite. A new finite element approach for stamping analysis of a plain-weave textile composite preform has been developed. This model is simple, efficient and can be used in the existing finite element codes. The model represents the preform as a mesh of 3-D truss elements and 3-D shell elements. The truss elements model the tows, which are allowed to both scissor and slide relative to one another. The shell elements represent a fictitious material that accounts for inter-tow friction and fiber angle jamming. The model takes into account large strains and large deformations. In-plane uniaxial tension tests have been performed on plain-weave specimens for determining the constitutive law of the transforming medium and to show the inter-tow sliding. Application of the model is demonstrated by simulating the stamping of a preform by a spherical punch. The results from the simulation show good correlation with results from the experiments.