Abstract
ABSTRACT Deform-3D is effective software for predicting flow of material in large deformation applications in absence of expense and time delays associated with shop trials. The Deform-3D software is used to build a 3D finite element open die forging model using warm forming process. Pre-processing, simulation, and post-processing are all phases that can be used to simulate. 17Cr-13Ni-2Mo and 17Cr-5Ni-5Mo-Ti alloyed steel billets were taken to perform analysis. Under warm forming allowable temperatures of 250°C, 500°C, and 750°C, simulation was performed using software. After 30 steps of simulation, results such as damage, strain effective, effective stress, total velocity, total displacement, and final Temperature are reported from the post-processing module. From results, comparative analysis will be carried out on performance characteristics at different billet temperatures. The Deform-3D software is used for finite element simulation during the forming process to accurately predict the deformation.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
