Abstract
One of the main issues with the cylindrical tubes is the propagation of cracks during their operational life wherein most of the cracks happen along the axial direction of the tube. This paper reports a 3D finite element simulation of the mechanical responses of an aluminum tube containing a longitudinal crack repaired with composite patches. After several loading-unloading cycles of the dynamic load, mechanical stresses at the crack tips may result in unstable crack propagation. Therefore, it is necessary to use a repair process to prevent the structure from final rupture. Glass/epoxy and boron/epoxy composite patches, with different number of patch layers, are considered in the analysis of the composite material repair effect on the crack tips stress distribution, evaluating the possibilities of crack propagation and patch delamination onset. Numerical simulations were partially compared with literature results to verify the modeling procedure, while a parametric study on the patch thickness was performed to verify the repair effectiveness. In general, boron and longer (140 mm) repair patches presented better performance than glass and shorter (70 mm) patches. Although thinner patches (2 layers) do not present the required resistance, thicker patches (16 layers) may precipitate delamination onset and thus should be avoided.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
