Abstract
Static analysis with finite element of a realistic femur nail bone-implant system in a typical proximal femoral fracture under physiological load bearing situations provides results for stress, displacement and strain. The question to be answered is, if simulation with the finite element analysis is able to explain biomechanically clinical observed patterns of failure. Surface-Reconstruction with CT database of a proximal femur and reconstruction with CT based density data was done. Next steps were to unite the bone structure with the Proximal Femoral Nail and to model two relevant fractures (31-A2.2 and A2.3 according AO). After modelling of geometry, isotropic material behaviour and load application numeric calculation of the femur-nail system with FE-software was performed. FE simulation mainly shows an axial dislocation of the femoral head screw with nearly no dislocation of the antirotation screw. This so-called z-effect therefore means: (1) Tilting of the proximal main fragment around the sagittal axis between the screws and (2) relative movement of both screws in the frontal plane. Relative movement of the two screws against each other could be the reason for implant failure, the so called cut out. Furthermore simulation shows different gliding of the screws explaining the so called z-telescoping. The analyzed stress patterns have to be relativized, because isotropic material behaviour of cancellous bone was assumed. Further examinations for this issue are necessary.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.