Abstract
The spacer grid assembly, which is an interconnected array of slotted grid straps and welded at the intersections to form an egg crate structure, is one of the main structural components of the nuclear fuel assemblies of a Pressurized light Water Reactor (PWR). The spacer grid assembly is structurally required to have enough crush strength under lateral loads due to lateral seismic accelerations, lateral Loss Of Coolant Accident (LOCA) blowdown forces, and shipping and handling loads so that the fuel rods are maintained within a coolable geometry, and that the control rods are able to be inserted. The ability of the spacer grid assembly to resist the lateral loads is usually characterized in terms of its dynamic and static crush strengths, which are acquired from the relevant tests. In this study, dynamic buckling tests and finite element analyses on spacer grid assembly specimens are carried out. As a result of the comparisons, the analysis results are in good agreement with the test results to within an 8 % difference range. Therefore, we could predict the crush strength of a spacer grid assembly in advance before performing the dynamic buckling test.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
