Fine tuning hole injection for high-performance polyfluorene-based blue emitting device by adjusting work function of anode via deposition of CF layer with proper ionization potential on indium tin oxide

Abstract

Abstract By introducing CFx thin film as hole injection layer on top of indium tin oxide (ITO) anode via plasma polymerization of CHF3, the device with poly(9,9-dioctylfluorene) (PFO) as emitting layer, ITO/CFx(35 W)/PFO/CsF/Ca/Al, is prepared. At the optimal C/F atom ratio using the radio frequency power 35 W, the device performance is optimal having the maximum current efficiency 3.1 cd/A and maximum brightness 8400 cd/m2. This is attributed to a better balance between hole and electron fluxes, resulting from a decrease in hole injection barrier as manifested by ultraviolet photoelectron spectroscopy and scanning surface potential microscopy.