Fine grained Al2O3/SiC composite ceramic tool material prepared by two-step microwave sintering

Abstract

Abstract Fine-grained Al2O3/SiC composite ceramic tool materials were synthesized by two-step microwave sintering. The effects of first-step sintering temperature (T1), content and particle size of SiC on the microstructure and mechanical properties were studied. It was found that the sample with higher content of SiC was achieved with finer grains, and the incorporation of SiC particles could bridge, branch and deflect the cracks, thus improving the fracture toughness. Higher T1 was required for the densification of the samples with higher content of SiC (>5 wt%). The sample containing 3 wt% SiC particles with the mean particle size of 100 nm, which was sintered at 1600 °C (T1) and 1100 °C (T2) for 5 min had the fine microstructure and optimal properties. Its relative density, grain size, Vickers hardness and fracture toughness obtained were 98.37%, 0.78 ± 0.31 μm, 18.40 ± 0.24 GPa and 4.97 ± 0.30 MPa m1/2, respectively. Compared to the sample prepared by single-step microwave sintering, although near full densification can be achieved in both two methods, the grain size was reduced by 36% and the fracture toughness was improved by 28% in two-step microwave sintering.