Abstract
BackgroundIn cochlear implants (CI) measuring the electrically evoked compound action potential (ECAP) has become an important tool for verifying the electrode-nerve interface as well as establishing a basis for a map to program the speech processor. In a standard clinical setup recordings are averaged over 25–100 repetitions to allow for the detection of ECAPs within the noise floor. To obtain an amplitude growth function, these measurements are normally performed for 5–10 different stimulation levels. We evaluate a recording paradigm where the stimulation intensity is increased in quasi-continuous steps and instead of averaging repeated recordings with identical stimulation parameters, running averages over small intervals of stimulation levels are computed. The first visible nerve response was manually identified by two experts.ResultsBoth recording paradigms were evaluated in 39 cochlear implants, showing an on average lower threshold of the first nerve response for the quasi-continuous measurement paradigm (Wilcoxon signed-rank test, p = 6.2e−08) compared to the clinical standard paradigm. The mean maximal loudness over all implants and stimulation electrodes was 13% lower at the 80 pulses/s quasi-continuous paradigm compared to the 44 pulses/s clinical standard paradigm.ConclusionsBeside a more robust determination of the ECAP threshold, the proposed quasi-continuous stimulation paradigm results in a more robust behavioral feedback of the CI user upon the maximal acceptable loudness percept. Furthermore this paradigm can also reveal the fine-structure in the amplitude growth function.
Highlights
In cochlear implants (CI) measuring the electrically evoked compound action potential (ECAP) has become an important tool for verifying the electrode-nerve interface as well as establishing a basis for a map to program the speech processor
Intra- and post-operatively, the integrity of the electrode-nerve interface can be proven by recording the electrically evoked compound action potential (ECAP) which shows a characteristic response with a negative peak and one or two positive peaks [1], see Fig. 1a
To keep the measurement time within a practical range, e.g. below 10–15 min, the amplitude growth function (AGF) is usually recorded with 5–10 different stimulation levels in standard clinical setups (Fig. 2a)
Summary
In cochlear implants (CI) measuring the electrically evoked compound action potential (ECAP) has become an important tool for verifying the electrode-nerve interface as well as establishing a basis for a map to program the speech processor. Intra- and post-operatively, the integrity of the electrode-nerve interface can be proven by recording the electrically evoked compound action potential (ECAP) which shows a characteristic response with a negative peak and one or two positive peaks [1], see Fig. 1a. Between the electric potential of the positive and the negative peak, will be detectable above a certain threshold level and will rise with increasing stimulation intensity, thereby describing a so-called amplitude growth function (AGF) (see Fig. 1b). To keep the measurement time within a practical range, e.g. below 10–15 min, the AGF is usually recorded with 5–10 different stimulation levels in standard clinical setups (Fig. 2a)
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
