Abstract
The environmental DNA (eDNA) method, which is widely applied in biomonitoring, is limited to laboratory analysis and processing. In this study, we developed a filtration/extraction component using a microfluidic channel, the Biryu-Chip (BC), and a filtration/extraction method, the BC method, to minimize the volume of the sample necessary for DNA extraction and subsequent PCR amplification. We tested the performance of the BC method and compared it with that of the Sterivex filtration/extraction method using aquarium and river water samples. We observed that using the BC method, the same concentration of extracted DNA was obtained with 1/20-1/40 of the filtration volume of the Sterivex method, suggesting that the BC method can be widely used for eDNA measurement. In addition, we performed on-site measurements of eDNA within 30 min using a mobile PCR device, demonstrating that filtration and extraction can be performed easily and quickly using the BC method. The PCR results obtained using the BC method were similar to those obtained using the Sterivex method. The BC method requires fewer steps; therefore, the risk of DNA contamination can be reduced. When combined with mobile PCR, the BC method can be applied to easily detect eDNA within 30 min from the collection of water sample, even on-site.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
