Film levitation and central jet of droplet impact on nanotube surface at superheated conditions.

Abstract

Influences of surface nanotubes at high temperatures are investigated on droplet impact dynamics and Leidenfrost effect. Five distinct regimes of impact droplets are found on the nanotube surface, including contact boiling, film levitation, central jet levitation, central jet, and Leidenfrost phenomenon. The regimes of film levitation, central jet levitation, and central jet are characterized by either film levitation and/or liquid central jet. The regime of Leidenfrost phenomenon is characterized by droplet bounce-off behavior free of any liquid jets. Film levitation is driven by the vaporization of two parts of the droplet, with one as the droplet bottom layer over the contact area above the nanotube structure, and the other as the hemiwicking liquid in nanotubes. Both the vaporization is impaired by increasing the surface temperature, which is attributed to the reduced contact time and less extent of spread of the droplet at a higher surface temperature. The central jet phenomenon is driven by the vapor stream produced by hemiwicking liquid in the central area upon impact. It is enhanced and then suppressed by elevating the surface temperature, resulting from the collective effects of the vapor pressure in nanotubes which increases with the surface temperature, and the cross-sectional area of the vapor stream, which increases and then decreases with the surface temperature. At a high Weber number, the Leidenfrost temperature can be increased by 125^{∘}C on the nanotube surface, implying a great potential in heat transfer enhancement for droplet-based applications.