Abstract
Film cooling is an effective method to keep the gas turbine blades from high temperature gases and thermal stresses. Square pulsating film cooling on different sections of a modified NASA C3X blade is numerically investigated. Temperature distribution and film cooling performance are investigated for various blowing ratios of 0.5, 0.75, 1.0, 1.5, 2 and 2.5 in pulse frequency of 50Hz. Reynolds-Averaged Navier-Stokes equations for steady and pulsating injection considered. The shear stress transport ( ) model applied for turbulence effects. Simulations are performed using finite volume method. Obtained results show different findings of pulsating film cooling on the various blade surfaces. For large blowing ratios, averaged pulsed film covering effectiveness at leading edge and pressure side of blade is reduced compared to small and middle values of blowing ratios. This trend is reversed in the suction side. Reynolds number of mainstream has the maximum effect on film effectiveness distribution on pressure section. The averaged centerline pulsed film coolant performance on the pressure surface and leading edge at blowing ratio of 0.5 and for suction side at blowing ratio 2.5 was maximum.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.