Abstract
The film cooling effectiveness of a staggered arrangement of small and large holes was investigated. The small auxiliary holes were located normal to the cooled surface, whereas the large main holes had an inclination angle of 30°. The center points of the small holes were located upstream, downstream, and in the same position as the main holes. A hole pitch (P/D) of 3 and a thickness (t/D) of 3 were considered. The film cooling performance of the hole in trench structure and the cylindrical hole was also determined. The numerical results show that large-scale vortices caused by the auxiliary hole injection inhibit the development of vortices caused by the main hole in the streamwise direction. This result differs from that of anti-vortex film cooling. Compared to the baseline, the increase in the surface-averaged values is 15-22% for the staggered arrangement, depending on the blowing ratio (0.5 to 2.0). The positions of the auxiliary holes have an effect on the spanwise-averaged values.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
