Abstract
ADMA-OPCO undertook a large 3D-4C OBC (ocean bottom cable) survey over an oil and gas field offshore Abu Dhabi, UAE. The survey was designed to acquire a high-fold dataset having wide azimuth and long offset sampling. The survey utilized, for the first time, two simultaneous source techniques so-called DS3 (Distance Separated Simultaneous Shooting) and MSS (Managed Spread and Sources) to enhance survey productivity and minimize HSE exposure in the field. DS3 and MSS involve two source vessels operating simultaneously while maintaining predetermined separations among shots in time and space to produce records with minimal contamination of seismic interferences. Unlike land surveys, these two techniques had not previously been applied to an OBC survey. To ensure adequacy of the techniques, the acquisition started with 2D tests prior to full-field implementation. With DS3 and MSS, the 3D survey yielded remarkable enhancement of survey productivity as compared to conventional single source vessel configuration. DS3 and MSS along with proper temporal and spatial source vessel separations enable recorded data to be handled as if acquired by non-simultaneous source survey.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.