Abstract

Sports halls must meet strict requirements for energy and indoor air quality (IAQ); therefore, there is a great challenge in the design of the heating, ventilation, and air conditioning (HVAC) systems of such buildings. IAQ in sports halls may be affected by thermal stratification, pollutants from different sources, the maintenance of building, and the HVAC system of the building, as well as by the activities performed inside the building. The aim of this study is to investigate thermal stratification conditions in accordance with the performance of the HVAC systems in the basketball training hall of Žalgirio Arena, Kaunas in Lithuania. Field measurements including temperature, relative humidity, and CO2 concentration were implemented between January and February in 2017. The temperature and relative humidity were measured at different heights (0.1, 1.7, 2.5, 3.9, 5.4, and 6.9 m) and at five different locations in the arena. Experimental results show that mixing the ventilation application together with air heating results in higher temperatures in the occupied zone than in the case of air heating without ventilation. Computational fluid dynamics (CFD) simulations revealed that using the same heating output as for warm air heating and underfloor heating, combined with mechanical mixing or displacement ventilation, ensures higher temperatures in the occupied zone, creating a potential for energy saving. An increase of air temperature was noticed from 3.9 m upwards. Since CO2 concentration near the ceiling was permissible, the study concluded that it is possible to recycle the air from the mentioned zone and use it again by mixing with the air of lower layers, thus saving energy for air heating.

Highlights

  • Large, open indoor spaces are found in shopping malls, arenas, sports halls, theatres, factory workshops, railway stations, airports, etc

  • Numerical calculation of the vertical temperature gradient for the case with with warm warm air air heating heating combined combined with with mechanical mechanical mixing ventilation from field measurements (a), (a), warm warm air heating combined with mechanical mixing ventilation from Computational fluid dynamics (CFD) predictions predictions (b), underfloor underfloor heating combined with mechanical mixing measurements ventilation from from CFD

  • Lithuanian normal requirements to keep indoor temperatures between 15 ◦ C and 25 ◦ C are met in the analyzed sports hall space for heights up to 5.4 m, using an air heating and mechanical mixing ventilation combination

Read more

Summary

Introduction

Open indoor spaces are found in shopping malls, arenas, sports halls, theatres, factory workshops, railway stations, airports, etc. This type of building is usually mechanically ventilated to ensure appropriate indoor air quality (IAQ) conditions. IAQ is influenced by several factors, including thermal stratification, pollutants from different sources, the building’s maintenance, the ventilation type, and the activities performed inside the building. Large spaces must meet requirements for energy and IAQ; the design of heating, ventilation, and air conditioning (HVAC) systems. Designed mechanical ventilation in large spaces may result to insufficient IAQ and energy losses [1]. Mainstream research about the thermal conditions of large indoor spaces focuses on IAQ and health problems, as well as on HVAC systems and energy efficiency

Objectives
Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call