Field investigation of the natural attenuation and intrinsic biodegradation rates at an underground storage tank site

Abstract

Contamination of groundwater by petroleum-hydrocarbons is a widespread environmental problem. Natural attenuation is a passive remedial approach to degrade and dissipate contaminants in soil and groundwater. In this study, a mass flux approach was used to calculate the contaminant mass reduction and field-scale decay rate at a gasoline spill site. The mass flux technique is accomplished using the differences in total contaminant mass flux across two cross sections of the contaminant plume. The mass flux calculation shows that up to 88% of the dissolved BTEX (benzene, toluene, ethylbenzene, and xylene isomers) removal was observed by natural attenuation processes. The efficiency of intrinsic biodegradation was evaluated by the in situ tracer method. A first-order decay model was applied for the natural attenuation and intrinsic biodegradation rate calculation. Results reveal that intrinsic biodegradation process was the major cause of the BTEX reduction among the natural attenuation mechanisms, and iron reduction was the dominant biodegradation pattern within the plume. Approximately 87% of the BTEX removal was caused by intrinsic biodegradation processes. The calculated BTEX natural attenuation and intrinsic biodegradation rates were 0.24 and 0.16% l/day, respectively. Results suggest that natural attenuation mechanisms can effectively contain the plume, and the mass flux method is useful in assessing the efficiency of the natural attenuation.