Abstract
A dual beam system consisting of focused ion and electron beams was used for manufacturing of Nb-gated silicon field emitter arrays. Gate opening was produced either by reactive focused ion beam etching of both the niobium and the silicon dioxide layer or by physical sputtering of the niobium layer by focused ion beam and subsequent wet etching of the underlying silicon dioxide layer. Platinum tips were deposited into the gate opening using an electron beam induced chemical reaction. Prototype devices, which exhibit field emission, were produced successfully. Several process parameters such as ion dose, beam diameter, and etch duration were systematically varied to identify the optimum condition for the fabrication of field emitter arrays.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
