Abstract
Abstract Reliable, low-cost datalogging alternatives promote transfer of knowledge and technology to the wider geotechnical and geoscientist community. Alternative systems can ease increased data resolution on large projects, operate in remote locations with restricted site access, or allow developing countries access to reliable and cost-effective datalogging solutions. A low-cost prototype datalogger was developed and tested in the laboratory with the use of open-source materials. Open-source example code is provided at the permanent links included in this paper. The materials for the prototype were 20 % the cost of commercial datalogging units with similar capabilities. With labor, these custom-built units were 35–45 % the cost of a purchased datalogger. Measurements from commercial units and the prototype datalogger were compared to determine the prototype’s accuracy. The datalogger was deployed in place of commercially available dataloggers at three sites across western Canada in the past two years. Laboratory and field testing of the low-cost datalogger has shown the prototype to be easily adaptable to various sensor types. The study experimented with negative pore water pressure (matric suction), volumetric water content, and temperatures from SDI-12 sensors as well as positive pore water pressure and temperature from vibrating wire piezometers. Telemetry modules have been attached to remote dataloggers, transmitting occasional data points, and periodically verifying system operation. Assembly, installation, and monitoring with the low-cost datalogging system over the past two years has demonstrated their durability in field applications. The implementation of a low-cost, open-source geotechnical datalogging system can be a challenge in some locations and requires the consideration of limitations, which are addressed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.