Field-based assessment of the design of lysimeters for landfill final cover seepage control

Abstract

ABSTRACT Lysimeters are considered the most appropriate instrument for assessing percolations rates through landfill final covers. Their design, however, must take into consideration the unsaturated nature of water seepage, otherwise they may act as a sink or cause flow avoidance. The aim of this study was to investigate whether using a simple approach to lysimeter design produces reliable seepage control data. Two different design methods were compared using a three-year field database of suction and seepage data collected from large-scale lysimeters installed at the St-Nicephore landfill in Canada. The first, or control, whose side walls were as high as the thickness of the cover material, was inspired from lysimeters installed during the Alternative Cover Assessment Program (ACAP; USA). The second lysimeter was designed based on the proposed simple design methodology, which focuses on the unsaturated flow and hydraulic properties of the materials to determine the optimal wall height. Analysis of the database did not show any indication of significant preferential flow, or alteration of the flow regime by the second lysimeter, which collected as much percolation as the control one (less than 5% difference). The linear method has not been tested for extreme climatic conditions and the wall heights calculated using this method may be very high when designed for very fine-grained soil covers.