Abstract

Seismic data are a significant facilitator for monitoring in carbon capture and sequestration projects, providing high-resolution images of fluid migration, using, for example, full-waveform inversion (FWI). Distributed acoustic sensing (DAS), a relatively novel technology for wavefield sampling, is well suited for this type of monitoring. Using noninvasive optical fibers, DAS allows for dense spatial sampling along the entire length of the wellbore, without disrupting operations. Permanently installed in the wellbore, typically behind casing, DAS offers highly repeatable and dense sampling of the transmitted wave modes crucial to seismic monitoring of injected carbon dioxide ([Formula: see text]). However, the DAS data consist of measurements of strain along the tangent of the fiber and therefore do not transfer directly to conventional FWI algorithms. Incorporation of DAS data in their native strain (or strain-rate) form in standard FWI algorithms, requires changing the definition of the receiver sampling operator to use geometric information about the fiber to supply tangential strain measurements to the FWI residual. The theoretical developments are applied to invert field vertical seismic profile data acquired with DAS fiber and accelerometers at a [Formula: see text] sequestration site in Newell Country, Alberta. Our method incorporates DAS data and accelerometer data in one objective function and allows us to tune the relative importance we wish to place on each data set. This method also transfers to noncollocated sensors, for example, surface-deployed geophones and borehole fiber. The inverted models contain features expected from the geology of the field site, and data modeled in the inverted models compare favorably with the field data for these sensor types. The models are derived from data acquired prior to [Formula: see text] injection, representing baseline models for future time-lapse studies planned at the field research station.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call