Abstract
AbstractThe principles of mining pressure in extra‐thick coal seams are different from those of medium‐thick and thick coal seams. Field investigation, laboratory test, and simulation analysis methods were used to study the correlation between the gob‐side entry (GSE) stability and coal pillar width during longwall top coal caving mining in extra‐thick coal seams. The test site is in Datong City, Shanxi Province, China. The mining pressure in N5209 tailgate with coal pillar of 30 m is severe based on the field investigations during the N5209 panel retreat. Global constitutive double‐yield and strain‐softening models were built to study the abutment pressures and plastic failure ranges of coal seams with different thicknesses and coal pillar widths. The simulation results show that the GSE with an 8‐m coal pillar is destressed and minimal GSE deformation occurs. In addition, the abutment stress in the coal pillar decreases with increasing coal seam thickness. The field tests indicate that the GSE with an 8‐m‐wide coal pillar is stable in extra‐thick coal seams. This study provides a reference for the coal pillar design in coal mines with similar geological and mining conditions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
