Abstract
The oil film pressure is one of the key parameters in journal bearings influencing the performance of the bearings. A fibre optic sensor was developed for online determination of actual oil film pressure under load without disturbing the actual tribological contact. Four optical sensors were integrated in a hydrodynamic journal bearing of a Wartsila Vasa 4R32 LN E medium-speed diesel engine with four cylinders, maximum power of 1,640 kW and rotating speed on 750 rpm. Online engine tests were carried out with different loads to study the sensor operation in real operating conditions. The engine tests were repeated six times over 4 years of operation reaching up to thousand hours of the engine use. The results showed differences in bearing pressure depending on the position of the sensor and on the operating cycle of the cylinders. The pressure peaks of all four cylinder work cycles could be identified in the measured pressure curves, and the pressure variations within the pressure curves fit well to the diesel engine’s work cycle and mass forces. The sensors had good repeatability over the whole test period.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
