Abstract
This paper investigates the formation of manufacturing induced fibre misalignment and breakage during fused filament fabrication (FFF) 3D printing of 1 K continuous carbon fibre filament. Single stripes at various turning angles and curvatures are printed by a desktop printer Prusa i3 using a specific brass nozzle and characterised using X-ray computed micro-tomography (µCT) and optical microscopy. A finite element (FE) model of the printing process is also established to support the experimental measurement. It has been found that high porosity and fibre misalignment in the printed straight stripe result from the weak fibre/matrix interface and the uneven pressure executed by the nozzle. Increase of turning angle and/or reducing of curvature radius leads to more aggravated printing defects, including shape inaccuracy, fibre twisting, folding and misalignment, due to the excessive force from the nozzle, debonding with the print bed and the unmatched geometry of nozzle outlet and fibre filament. Severe fibre breakage and significant change of thickness can be seen in the samples with turning angles larger than 120° or curvature radius smaller than 5 mm, while the wrinkles of the stripe in the inner periphery appear more frequently as the curvature radius decreases.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
