Abstract
Abstract This paper reports a study of the effect of an interphase on strain development in fibre-fragments. In order to form an interphase, an epoxy resin with known properties was applied to the surface of unsized reinforcing fibres and cured. These were then embedded in a matrix resin coupon, prior to fragmentation testing. The study included an examination of the effect of interphase thickness, by applying multiple coats of one of the resins, and the effect of the interphase properties, by varying the coating resins. It was found that the average fragment lengths at saturation were difficult to distinguish, as a result of the scatter introduced by the statistical distribution of fibre strengths. However, the strain interval between onset of fragmentation and saturation was found to be more sensitive to variations in the interphase properties. A finite element model was used to examine the strain development in the fragments in more detail. The mechanical properties of the fibre, interphase and matrix were accurately incorporated into the model, providing a realistic representation of the state of strain in the experimental samples. The predicted deformations around the fibre-break provided an explanation for the experimental observations.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Composites Part A: Applied Science and Manufacturing
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
