Abstract
The influence of modification of fiberglass in the cured state in the microwave electromagnetic field on the value of the limit stresses is significantly manifested when testing samples in the initial state. The increase in limit voltages is on average 7%. Tests of modified samples after exposure in full-scale conditions showed a decrease in the effect with an increase in the exposure time from 6% for exposure of 3 months to 3% for exposure of 8 months. This significantly increases the uniformity of the bending strength values in the batch, which is manifested in a decrease in the coefficient of variation of limit stresses relative to the control samples by 33%. Functional dependencies in the form of 2nd-order polynomials are obtained, which allow predicting the stability of products made of modified fiberglass for long-term operation under the influence of environmental factors with a confidence of up to 98%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have