Fiber Optic Voltage Sensor Based on Capacitance Current Measurement With Temperature and Wavelength Error Correction Capability

Abstract

Traditional optical voltage transformers (OVTs) based on electro-optical and inverse piezoelectric effects are gradually exposing their accuracy and reliability issues. In contrast, fibers for measuring electricity have unique properties and significant advantages in the high-voltage power industry, especially fiber optic current sensor (FOCS), which has been widely used in the field of high-voltage measurement. As a result, a novel fiber optical voltage sensor (FOVS) is proposed, which uses FOCS to measure the current flowing through the capacitive voltage divider (CVD) and then calculates the primary voltage proportional to it. In order to solve the inherent temperature- and wavelength -dependent errors and achieve high accuracy, a novel closed-loop signal processing method, which aims to minimize the influence of temperature-sensitive components such as CVD, quarter waveplate, and sensing fiber on the measurement accuracy of the system, is presented. A 110-kV FOVS prototype with a rated voltage of 110/ <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$({3})^{1/2}$ </tex-math></inline-formula> kV and a rated frequency of 50 Hz is developed and tested. The results show that after temperature and wavelength correction, the accuracy reaches the metering class of 0.2% and protection class of 3P specified in GB/T20840.7-2007