FGF-2 release and bonding/physical properties of 4-META/MMA-based adhesive resins incorporating small FGF-2-loaded polymer particles

Abstract

ObjectivesNon-biodegradable particles comprising hydroxyethyl methacrylate (HEMA) and trimethylolpropane trimethacrylate (TMPT) have been reported as useful carriers for fibroblast growth factor-2 (FGF-2). They have also been successfully incorporated into the 4-[2-(methacryloyloxy)ethoxycarbonyl]phthalic anhydride/methyl methacrylate-tri-n-butyl borane (4-META/MMA-TBB) resin to promote tissue regeneration. However, smaller particles are required to obtain restorative materials acceptable for clinical use. The aim of this study was to investigate the ability of the 4-META/MMA-TBB resin that comprises small FGF-2-loaded particles to release FGF-2 and promote cell proliferation. In addition, the bonding and physical properties of the experimental resin were evaluated. MethodsThe small particles loaded with FGF-2 were newly fabricated and incorporated into the commercial 4-META/MMA-TBB resin. Release profiles of FGF-2 from the experimental resins were assessed, and the cell proliferation cultured with the eluate was evaluated. The bonding and physical properties of the resins were evaluated using shear bond strength and three-point bending tests, and by measuring the curing time, water absorption, and water dissolution. ResultsSustained release of FGF-2 from the experimental resins for two weeks was observed, and the released FGF-2 was demonstrated to promote cell proliferation. All bonding and physical properties of the 4-META/MMA-TBB resins were found acceptable for clinical use. SignificanceThe small FGF-2-loaded particles incorporated into the 4-META/MMA-TBB resin had the same abilities to release FGF-2 and proliferate cells, as those exhibited by the conventionally sized particles. In addition, there were no adverse influences on bonding and physical properties, suggesting that the bioactive adhesive resin was acceptable for clinical use.