Abstract

Ferrite nanoparticles of composition Zn0.5Ni0.5Fe2O4 were prepared by forced hydrolysis in a polyol (polyol process) from the corresponding iron, nickel, and zinc acetates. Synthesis conditions allowed for obtaining polycrystalline epitaxial clusters of about 22 nm in size with an average crystal size of about 5 nm. These powders were subsequently consolidated by spark plasma sintering (SPS) technique under a pressure of 80 MPa and temperatures in the 350 to 500 °C range for short periods (5 to 10 min). Densities reached 92% to 94% of the theoretical density. Particle size remained smaller than 61 nm, even for the highest temperature. Ferromagnetic resonance experiments at 77 K showed broadened resonance lines. In contrast with powdered nanoparticles, these high-density bodies can be used in many high-frequency applications.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.