Abstract
During laser welding of an Al-Si coated 22MnB5 steel to produce tailor-welded blanks, the Al-Si coating mixes into the weld and causes the formation of the lower strength ferrite phase dispersed in an otherwise martensitic matrix. It has been shown that the presence of the ferrite phase is the principal reason for premature failure of hot-stamped laser-welded joints. Currently, the Al-Si coating is removed prior to welding, which can be time consuming. This work showed that adding Ni to the fusion zone of laser welded Al-Si coated 22MnB5 steel by welding through a pure Ni coating of a specified thickness, ferrite formation can be suppressed, whereby improving the weld strength and successfully shifting failure from the fusion zone, where it normally occurs, to the base material to achieve 100%joint strength. This work also showed that laser welding Al-Si coated 22MnB5 steel through a Ni coating eliminated the need to mechanically or chemically remove the Al-Si coating prior to welding.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
