Abstract
Fe-Mn-Si-Cr-based shape memory alloys have good workability, low price and advantages in the bonding of the sleeve element. With good shape memory Fe-Mn-Si-Cr-based alloys in this study, we try to add it with trace rhenium (Re) element. After different aging treatment, we go through the bending test and analysis of micro-structure, then we choose the one of the better shape memory effect to do heat treatment and shape memory training. In Fe-30Mn-6Si-5Cr、Fe-30Mn-6Si-5Cr-0.05Re、Fe-30Mn-6Si-5Cr-0.1Re and Fe-30Mn-6Si-5Cr-0.3Re alloys, there will be BCC structure of the precipitated phase in the grain boundaries and the parent phase through aging above 600℃ for 2 hours. It is called phase which is similar to the parent phase. Afer aging at 700℃ for 2 hours, the alloys have the better hardness and shape memory recovery. Apply cold-working on Fe-30Mn-6Si-5Cr-0.1Re alloy to make pre-strain 5%, 10%, 15% and 20%. The shape memory recovery will be better through the one of pre-strain 5% through aging at 700℃ for 2 hours. Use this one to do shape memory training experiment. The recovery rate will increase with training times. After 2 times, the recovery rate will almost be 100%. It is concluded that we can get the best shape memory alloy efficiently by using both heat treatment and shape memory training.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
