Abstract
A numerical study was conducted using the finite element method to determine the effects of square and rectangular cutouts on the buckling behavior of a 16-ply quasi-isotropic graphite/epoxy symmetrically laminated rectangular composite plate. The square/ rectangular cutouts were subjected to uniaxial compression loading. This study addresses the effects of the size of the square/rectangular cutout, orientation of the square/rectangular cutout, plate aspect ratio (a/b), and plate length/thickness ratio (a/t) on the buckling behavior of the symmetrically laminated rectangular composite plate under uniaxial compression loading. Buckling loads were computed for seven different quasi-isotropic laminate configurations [0°/+45°/−45°/90°]2s, [15°/+60°/−30°/−75°]2s, [30°/+75°/−15°/−60°]2s, [45°/+90°/0°/−45°]2s, [60°/−75°/+15°/−30°]2s, [75°/−60°/+30°/−15°]2s, [90°/−45°/+45/°0°]2s. Results showed that the magnitudes of the buckling loads decrease with increasing cutout positioned angle as well as c/b and d/b ratios for plates with a rectangular cutout. The symmetrically laminated quasi-isotropic [0°/+45°/−45°/90°]2s composite plate is stronger than all other symmetrically analyzed laminated quasi-isotropic composite plates. The magnitudes of the buckling loads of a rectangular composite plate with square/rectangular cutout decrease with increasing plate aspect ratio (a/b) and plate length/thickness (a/t) ratio.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
