FEATURES OF THE COPPER(II) CARBONATE INFLUENCE ON AN INFLAMMABILITY OF EPOXY-AMINE COMPOSITES

Abstract

Introduction. Inflammation susceptibility and the nature of combustion are one of the most important characteristics for the parametrization of the fire hazard of polymer materials. Because ignition is the occurrence process of the persistent flame near the surface of the material, which is preceded by the process of propagation of the flame front on its surface, the predisposition to ignition of the polymer materials plays an important role in the aspect of initiation of fires. A comparative evaluation of inflammation susceptibility of substances of different nature was carried out basing the determination of the ignition point and self-ignition point.
 Purpose. The work aims to determine the peculiarities of the influence of copper(II) carbonate on the increase of ignition point and self-ignition point of epoxy-amine composites.
 Metods. The experimental determination of the ignition point and self-ignition point was carried out according to all-Union State Standard 12.1.044-89 (4.7, 4.9 items). Toward this end, three samples of the test material were prepared with a weight of 3 g. Before testing, samples were conditioned in air.
 Results. Data on the effect of copper(II) carbonate on the value of ignition point and self-ignition point of the epoxy-amine composites indicate that the epoxy-amine-based composite, cured by the traditional amine hardener (PEPA), has lowest temperature of the ignition and self-ignition. The temperture values of ignition and self-ignition increase as the content of copper(II) carbonate increases in the composite, measuring up a maximum value at 80 g of CuCO3 per 100 g of binder. It is proved that the reason for the increase of the ignition temperature and self-ignition temperature of the modified epoxy-amine composites is the appearance of strong coordination bonds that are formed due to the chemical binding of the combustible polyethylenepolyamine with the non-combustible inorganic salt (with copper(II) carbonate). The measured values of the ignition point and self-ignition point of the amine hardener (PEPA) of the epoxy-diane oligomer indicate that it is able to ignite at temperature 136ºC, and self-ignite at temperature 393ºС. After forming the chelate complex, the coordinated PEPA turns into a practically non-combustible substance.
 Conclusion. Consequently, the main factor that affects to make difficulty of ignition of organic nitrogen-containing substances is the efficient chemical binding N atoms of the combustible amine molecules with d-metal atom of the non-combustible inorganic salt, which is accompanied by the formation of sufficiently strong coordination bonds of the Cu(ІІ)¬N type. The resistance to ignition of the modified polymeric composites will depend on the binding strength of the copper(II) salt with an amine hardener. The mechanism of the fire retardant influence of the d-metal salts on combustion of the epoxy-amine-based composites consists in this. So, copper(II) compounds, in particular copper(II) carbonate, can successfully be used as the fire retardant additives enabling of efficiently lowering the fire hazard of synthetic polymers based on epoxy-amine composites.