Abstract
As Boron Neutron Capture Therapy (BNCT) grows to become a good alternative for radio-resistant tumours, long preparation and irradiation time limit the number of treatments possible. To resolve this issue, this work aims to propose implementing a compact accelerator-based neutron generator which can provide multiple neutron beams of at least 109/s/cm2 for multi-port BNCT, while maintaining low gamma and fast-neutron contamination.This study applies a 50 MeV proton beam at a realizable current of 500 μA from an AVF cyclotron with a W target to sustain a high neutron yield for multiple extractions. A beam shaping assembly (BSA) is also studied to moderate and shape the neutron beam for BNCT. A cylindrical BSA surrounding the W target is proposed to make multiple gates extraction plausible. The BSA consists of a moderator assembly (Fe, AlF3 and Teflon), Pb reflector, Li thermal neutron filter (TNF), and borated-polyethylene coupled with Pb which act as neutron and gamma shielding. The proposed design managed to deliver about 2 × 109 epithermal-neutron/cm2/s with satisfactory beam quality at 4 ports for multiple BNCT. Thus, the neutron generator for multi-port BNCT proposed in this study has been proven to be feasible.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.