Abstract
Orphan radioactive sources inadvertently melted in steel plants are a health and economical hazard. Thus, regulation authorities impose strict control measurements to be performed at these plants. However, a recent series of incidents related to the melting of {}^{241}hbox {Am} sources demonstrated the inadequacy of even state of the art systems in revealing this low-energy gamma ray emitter up to activities of the order of hundreds GBq. However, {}^{241}hbox {Am} sources are characterized by a weak neutron emission which can be detected by proper monitor systems. This work provides a feasibility study of a shielding-independent neutron-sensitive portal monitor system to be installed in steel plants. Measurements were performed both with a certified {}^{241}hbox {Am} shielded source and at the weighing area of a steel plant, to assess both the detector performance and the practical feasibility of the system implementation in work-place fields. A risk evaluation analysis demonstrated that with the current control systems {}^{241}hbox {Am} sources up to 185 GBq could pass undetected with a potential exposure for workers equal to 1.7 mSv, consistent with recent accidents reports. The proposed technique could reveal {}^{241}hbox {Am} activities down to 2 GBq, decreasing the worker exposure down to 24 upmu hbox {Sv}, without interfering with the standard plant operations.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
