Feasibility study of a new method to measure fast neutron flux by neutron-induced X-ray fluorescence method

Abstract

A new method is proposed to detect fast neutron flux: the neutron-induced X-ray fluorescence method. In this method, the neutrons are firstly converted to charged particles, and then the charged particles interact with the target to generate the characteristic X-ray fluorescence. Finally, the Kα X-ray emission from the target is detected for measurement of the neutron flux. On the basis of this method, the structure of the detection device is designed: it is composed mainly of a layer of a fast neutron converter and a layer of the target. The Geant4 Monte Carlo simulation toolkit is used to optimize the detection device. According to the simulation results, the detection device is manufactured so as to perform the feasibility verification experiments. In the experiments, a D-T neutron generator is used as the neutron source, and the number of neutrons is changed in two ways: by change of the working voltage of the neutron generator or by change of the measurement time. The experimental results show that there is a good linear relationship between the number of neutrons and the Kα X-ray counts when the measurement time is changed. When the working voltage of the neutron generator is changed, a 3He proportional counter is used as a reference detector. The results show that the trend of the Kα X-ray counts is in good agreement with the trend for the 3He proportional counter. It is proved that this method is feasible for fast neutron flux measurement.