Abstract
Ruthenium is one of the most abundant fission products in fast breeder reactors. It creates problems during the reprocessing of spent fuel and in the management and disposal of wastes, owing to the formation of highly volatile and radiotoxic 106RuO4. Cyclic voltammograms of [Ru(NO)]3+ solution recorded at Pt electrode revealed that surge in anodic current occurs at about 1.25 V (vs Ag/AgCl) due to oxidation of Ru and water. Batch experiments were carried out for the separation of Ru as RuO4 vapour from pure nitrosyl nitrate and simulated high level liquid waste (SHLLW) solutions by electro-oxidation method as a function of nitric acid concentration, temperature, applied potential and concentration of the redox mediator, Ce. The results indicated that separation percentage of Ru increased with increase in applied potential as well as temperature and decrease in acidity. In the presence of 0.04 M Ce at 1.65 V (vs Ag/AgCl), separation of 97% was obtained in 1 M HNO3 after 10 h of electrolysis; however, only 58% could be separated from SHLLW solution under similar experimental conditions. Rate constants were calculated for the oxidation reaction of ruthenium and the energy of activation was determined to be 75.69 kJ/mol.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
