Abstract
Intracoronary stent implantation is a frequently performed procedure in the treatment of stenoses in coronary arteries, but in-stent restenosis occurs in ∼10% to 15% of patients. A noninvasive diagnostic procedure to evaluate in-stent restenosis would therefore be of great benefit. We investigated the feasibility of assessing stent patency with 16-slice computed tomography. Multislice computed tomography (MSCT) was performed in 22 patients with previously implanted stents. For each stent, assessability was determined and related to stent type and diameter. Subsequently, the presence of significant restenosis was determined in the evaluable stents. In addition, peristent lumina (5 mm proximal and distal to the stent) were evaluated. Conventional angiography in combination with quantitative coronary angiography served as the standard of reference. MSCT was performed successfully in all but 1 patient. Of 65 stents, 50 (77%) were determined assessable. Uninterpretable stents tended to have a thicker strut and/or a smaller diameter. In the evaluable stents, 7 of 9 stenoses were detected and the absence of restenosis was correctly identified in all 41 patent stents, resulting in a sensitivity and specificity of 78% and 100%, respectively. Sensitivity and specificity for the detection of peristent stenosis were 75% and 96%, respectively. In conclusion, MSCT may be useful in the assessment of stent patency and may function as a gatekeeper before invasive diagnostic procedures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.