Abstract
The main purpose of the present paper is to improve the performance of the adaptive neuro-fuzzy inference system (ANFIS) in predicting the thermophysical properties of Al2O3-MWCNT/thermal oil hybrid nanofluid through mixing using metaheuristic optimization techniques. A literature survey showed that the use of an artificial neural network (ANN) is the most widely used method, although there are other methods that showed better performance. Moreover, it was found in the literature that artificial intelligence methods have been widely used for predicting the thermal conductivity of nanofluids. Thus, in the present study, genetic algorithms (GAs) and particle swarm optimization (PSO) have been utilized to search and determine the antecedent and consequent parameters of the ANFIS model. Solid concentration and temperature were considered as input variables, and thermal conductivity, dynamic viscosity, heat transfer performance, and pumping power in both the internal laminar and turbulent flow regimes were the outputs. In order to evaluate and compare the performance of the models, two statistical indices of root mean square error (RMSE) and determination coefficient (R) were utilized. Based on the results, both of the models are able to predict the thermophysical properties appropriately. However, the ANFIS-PSO model had a better performance than the ANFIS-GA model. Finally, the studied thermophysical properties were developed by the trained ANFIS-PSO model.
Highlights
According to Choi and Eastman [1], the introduction of nanofluids, which are a suspension of nano-sized particles in conventional fluids (i.e., water, ethylene glycol (EG), oil, and so forth), has opened new doors to improve heat transfer rate
A growing body of literature has been published on the application of artificial intelligence in predicting the thermophysical properties of different nanofluids [25,26,27]
The values of thermal conductivity, as well as dynamic viscosity, heat transfer performance, and pumping power in both the internal laminar and turbulent flow regimes were measured at temperatures of 25, 30, 35, 40, 45, and 50 ◦ C, and volume fractions of 0.125%, 0.25%, 0.5%, 1%, and 1.5%
Summary
According to Choi and Eastman [1], the introduction of nanofluids, which are a suspension of nano-sized particles in conventional fluids (i.e., water, ethylene glycol (EG), oil, and so forth), has opened new doors to improve heat transfer rate After this pioneering study, many researchers conducted different projects on preparation methods [2,3,4], characterization [5,6], thermophysical properties [7,8,9,10,11], heat transfer performance [12,13,14,15,16], and the possible applications [17,18,19] of different nanofluids. A growing body of literature has been published on the application of artificial intelligence in predicting the thermophysical properties of different nanofluids [25,26,27]
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.