Abstract
Air leakage in goaf often leads to coal spontaneous combustion (CSC), which not only directly affects the safety production of mines but also causes significant environmental damage. Therefore, effectively sealing the airflow in goaf is crucial for preventing CSC. Feasibility experiments on using two-phase foam to seal air leakage in goaf were conducted, leveraging the advantages of large flow rate, wide diffusion range, and good accumulation characteristics of two-phase foam. The research results indicate that continuous injection of foam into loose media with maintained ventilation can completely seal the air leakage, with the foam capable of withstanding wind pressures of nearly 600 Pa. When the foam is used for one-time sealing with a length of 2 m, it remains effective for 60 min, and the sealing effectiveness improves with longer distances sealed against air leakage. Numerical simulation analysis and field measurements of airflow leakage in mine working faces reveal that effectively sealing the airflow passage in the goaf behind the corner of the return airway is crucial for preventing CSC. Two methods are proposed for sealing external airflow during coal mining: foam injection using a point drilling method near the heading and an incremental buried pipe injection method. Finally, the feasibility of two-phase foam sealing technology for goaf airflow leakage is analyzed from multiple perspectives including sealing effectiveness, practicality, economy, foaming process, and engineering implementation. The research findings provide new insights into goaf sealing technology, aiding in addressing safety and environmental issues caused by spontaneous combustion in goaf areas.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.