Abstract

PurposeThe assessment of the economic feasibility of floating offshore wind farms (FOWFs) plays an important role in the future possible spreading of this challenging technology in the wind power industry. The use of specific economic analyses is fundamental to point out the potential of FOWFs and to sustain their technical value. Within this topic, the implementation of the FOWF life cycle cost model and producibility analysis in a geographic information system is developed, with the aim of carrying out a feasibility analysis at the territorial scale, for different types of floater. Moreover, a simplified model for a quick life cycle cost assessment is proposed and calibrated.MethodsThe available cost model is first validated comparing the costs of FOWFs based on different floaters (Semi-Submersible Platform—SSP, Spar Buoy—SB and Tension Leg Platform—TLP) with corresponding results available in the literature. Then, it is implemented in QGIS to be used for territorial-scale analyses and sensitivity analyses of the cost parameters. A feasibility analysis is developed through the main financial parameters. Finally, the results are then used to calibrate a simplified version of the cost model that depends on three main parameters, namely distance to shore, distance from the port of operation and bathymetry.Results and discussionThe FOWF cost values are found to be in good agreement with those coming from analytical methods similar to the one from the authors. However, some discrepancies with those based on average costs are observed. Then, the results of the sensitivity analysis are presented as life cycle cost maps, giving an overall picture of the variation of the total cost of FOWF installations on a reference domain. The results show that among the three types of floaters considered here, the SSP proved to be the most promising one, giving lower costs than the SB and the TLP. Moreover, a good agreement between the results in terms of total cost of FOWFs calculated with the analytical and simplified models for SSPs, SBs and TLPs is observed. Finally, the feasibility analysis showed that the financial parameters are more influenced by the wind speed than by the cost of the farm.ConclusionsThe paper aims to provide guidance on how to carry out feasibility analyses of a specific site for FOWF installation, thus supporting decision-making procedures. The approach and the results presented here are meant for use in the early stage of the decision-making process, as a tool for the assessment of the economic feasibility of FOWFs installation.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.