Abstract
Processing of a continuous ceramic fiber/iron alloy composite by powder metallurgy was investigated. The preparation of a continuous ceramic fiber-reinforced iron alloy is feasible by mixing of continuous ceramic fibers and iron alloy powders in an ultrasonic equipment with acetone, followed by hot isostatic pressing (HIPing) or hot pressing (HPing) at 1273 K. In HPing, a volume fraction of ceramic fibers in the composite in which ceramic fibers are distributed uniformly depends upon a diameter of ceramic fibers and a mean particle size of iron alloy powders. When a volume fraction of ceramic fibers is more than an optimum value, the excess fibers aggregate, resulting in nonuniform dispersion of ceramic fibers. Nonuniform dispersion is also achieved because of the formation of ceramic fiber-free region when a volume fraction of ceramic fiber is less than the optimum value. In uniform dispersion of ceramic fibers, volume fraction of ceramic fibers in HIPed composite is higher than that in HPed composite. This is because ceramic fiber migration due to high stress occurs during HIPing. Therefore, to obtain the composite with uniform dispersion of ceramic fibers, the specimen is to be uniformly deformed during HIPing.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of the Japan Institute of Metals and Materials
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
