Abstract
The dry reforming of methane is a highly popular procedure since it can transform two of the most abundant greenhouse gases, methane and carbon dioxide, into useful syngases that can be further processed into valuable chemicals. To successfully achieve this conversion for the effective production of syngas, an optimal catalyst with advantageous physicochemical features must be developed. In this study, a variety of Ni-based catalysts supported by zirconia alumina (5Ni-10Zr + Al) were prepared by using the impregnation approach. Different loadings of Fe promoter were used, and the performances of the resulting catalysts in terms of activity and stability were investigated. The catalyst used in this study had an active metal component made of 5% Ni and x% Fe supported on 10ZrO2 + Al2O3, where x = (1, 2, 3, and 4). The physicochemical characteristics of both freshly calcined and used catalysts were studied using a range of characterization techniques, such as: N2 adsorption–desorption isotherms, XRD, H2-TPR, Raman spectroscopy, TGA, and TEM. An investigation of the effects of the Fe promoter on the catalytic activity of the catalyst (5Ni + xFe-10Zr + Al) was conducted. Amongst the studied catalysts, the 5Ni + 3Fe-10Zr + Al catalyst showed the best catalytic activity with CH4 and CO2 conversions of 87% and 90%, respectively, and had an H2/CO ratio of 0.98.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.