Fault-tolerant resynthesis with dual-output LUTs

Abstract

We present a fault-tolerant post-mapping resynthesis for FPGA-based designs that exploits the dual-output feature of modern FPGA architectures to improve the reliability of a mapped circuit against faults. Emerging FPGA architectures, such as 6-LUTs in Xilinx Virtex-5 and 8-input ALMs in Altera Stratix-III, have a secondary LUT output that allows access to non-occupied SRAM bits. We show that this architectural feature can be used to build redundancy for fault masking with limited area and performance over-head. Our algorithm improves reliability of a mapping by performing two basic operations: duplication (in which free configuration bits are used to duplicate a logic function whose value is obtained at the secondary output) and encoding (in which two copies of the same logic function are ANDed or ORed together in the fanout of the duplicated logic). The problem of fault tolerant post-mapping resynthesis is then formulated as the optimal duplication and encoding scheme that ensures the minimal circuit fault rate w.r.t. a stochastic single fault model. We present an ILP formulation of this problem and an efficient algorithm based on generalized network flow. On MCNC benchmarks, experimental results show that for combinational circuits the proposed approach improves meantime- to-failure(MTTF) by 27% with 4% area overhead, and the proposed approach with explicit area redundancy improves MTTF by 113% with 36% area overhead, compared to the baseline mapping by ABC. This provides a viable fault tolerance solution for non-mission critical applications compared to TMR (triple modular redundancy) which has a 5x--6x area overhead.