Fault Line Selection of Small Current Grounding System Research Based on Zero Sequence Circuit Current Phase

Abstract

Abstract This paper investigates fault line selection in small current grounding systems, focusing on the zero sequence current phase characteristics. Small current grounding systems, prevalent in medium voltage distribution networks, face challenges in fault detection due to minimal fault currents during single status phase grounding faults. Traditional methods relying on manual line switching and zero sequence voltage monitoring are inefficient and can induce overvoltage. This study categorizes fault line selection techniques into three approaches: steady-state fault information, transient information, and modern signal processing technology. The analysis of zero sequence currents in non-grounded systems reveals that fault line zero sequence currents equal the sum of system capacitive currents, flowing opposite to those in non-fault lines. Additionally, transient signal analysis shows that these signals provide more robust information for fault detection. MATLAB simulations validate the theoretical models, demonstrating that zero sequence current direction and amplitude effectively identify fault lines. The results confirm the efficacy of combining steady-state and transient signal analyses for accurate fault line selection, contributing to enhanced safety and reliability in power distribution networks. This research offers practical insights and tools for engineers, improving fault management and reducing potential economic losses in small current grounding systems.